Assembly
Step-by-step
Components
First, grab the components you need from the component table.
You need:
- 11 LEDs (with colors of your choice)
- 11 560-1k resistors (to select brightness of your choice)
- Pin headers
- 1 Microphone and accompanying module
Soldering
Then, grab a solder paste syringe, you may need to share with your peers.
Then, go to EnVision to solder the components with the available equipment of your choice (probably a soldering iron).
Things to Consider
- Which direction should the LEDs point?
- Which side should the pin headers and microphone be placed?